How to use glass cutters to cut glass more conveniently

Glass knives can be divided into diamond glass knives and alloy roller glass knives. They are suitable for cutting flat glass with a thickness of 1-8 mm. They are indispensable glass cutting tools for the decoration and building materials industries.

1. Cut 2-3mm thick flat glass with glass cutter: cut 2 to 3mm thick flat glass with 2mm*12mm fine wooden ruler, first measure the size of the glass, and set the cutting size on the ruler. Consider 3mm. Neutral and 2mm knife edge, when cutting, the size of one side can be close to one side of the glass, and the glass knife should be close to the other end of the ruler. The edge of the blade is straight forward and backward, and there is no light and heavy bending.

2, using a glass knife to cut 4-6mm thick glass: the method of cutting 4-6mm thick glass is roughly the same as above, but because the glass is thicker, it must be grasped and stabilized when cutting, and the force is light and uniform. Another cutting method is to use a 4mm*50mm ruler. The glass knife is cut close to the ruler. When cutting, some kerosene should be pre-brushed on the cutting mouth to make the cutting mouth easy to pull off after oil leakage.

3, using a glass knife to cut 5-6mm thick large glass: cutting 5-6mm thick large glass method is the same as cutting with 5mm * 40mm ruler, but the large glass area is large, people can not cut on the ground, sometimes It is necessary to stand on the glass for cutting. Before cutting, the cloth must be padded on the workbench to make the glass evenly pressed. After cutting, the hands need to hold the required glass, and at the same time, the lower plate is removed, which can not be careless, and the whole glass is broken.

4, using a glass knife to cut the wire glass: the method of cutting the wire glass is the same as the 5-6mm flat glass, but the cutting surface of the wire glass is uneven, the knife edge is easy to slide when cutting, it is difficult to master, so it is necessary to recognize the knife edge and hold the knife Head, the force is larger than the average glass, the speed should be faster, so that there will be no bending and not straight. After cutting, hold the glass firmly with both hands and pull it down. The wire can be broken, and then the pliers can be used to cut the wire to avoid scratching the palm when carrying.

5. Cut the embossed glass with a glass cutter: cut the embossed glass with a glass cutter, the embossed surface should be downward, and the cutting method is the same as that of the wired glass.

6. Cut the frosted glass with a glass knife: cut the frosted glass with a glass knife, the rough surface should be downward, and the cutting method is the same as the flat glass.Glass knives can be divided into diamond glass knives and alloy roller glass knives. They are suitable for cutting flat glass with a thickness of 1-8 mm. They are indispensable glass cutting tools for the decoration and building materials industries.