Home > News > Technical documentation > Installation skill of windows .....
Certifications
Best selling products
Contact us
Company Name: Qingdao yujing fanyu Trading Co. Ltd. Address:Room 1701, Building 2, Yulong Building, #, Miaoling Road, Qingdao City, China Tel: 86-0532...
Contact Now
Share

News

Installation skill of windows and doors of Broken bridge

  • Author:Fanyumaoyi
  • Source:www. Chinamirrormanufact
  • Release on :2017-06-14

  Broken bridge doors and windows can block some outside the dust, noise and other pollution, so that we live a better environment, then you know the installation method of the broken bridge windows and doors? Let's look at the installation method of the broken bridge doors and windows.
  
   Installation of windows and doors of Broken bridge
  
   First step:The glass door is placed on the line positioning, glass door is composed of fixed glass and movable glass, in the positioning of the glass door need according to the corresponding requirements, release suitable for the glass door positioning line, but also to determine the specific location of the glass door frame.
  
   Step Two:Installation of the limit slot, in the installation, you need to follow the position of the edge of the installation slots, using a glued pad to adjust the depth of the limit groove.
  
   Step Three:To install the wooden bottom, the first need to fix the square wood on the ground above, and then the metal finishes using adhesive paste on the square wood can.
  
   Step Fourth:The installation of the door frame, the first need to nail vertical frame of the square wood, and then use the plywood to determine the specific location and shape of the frame, and then the metal decorated bread outside the door frame.
  
   Step Fifth:Install glass, use glass suction machine to absorb thick glass, then move the tight glass to the position of the frame, then install the glass into the limit groove, then install the bottom of the glass to the end.
  
   Step Sixth:Fixed glass, respectively, on both sides of the glass nailed two square wood, and then use adhesive to paste the metal face on the square wood.
  
  Step Seventh:Injection stripping agent for sealing, in the limit groove and the bottom of the glass and the gap between the border, the appropriate amount of glass glue to be injected into the operation, the injection of glass glue to be even, after the injection of glass glue, in time to wipe off.