Home > News > Technical documentation > How to educe the glass and wha.....
Best selling products
Contact us
Company Name: Qingdao Hongxiang Fanyu Trading Co., Ltd. Address: Room 1701,Yulong Building 2, Miaoling Road, Qingdao Tel: 0086-18300250107 + 86-15864262692, + 86-18663659299 
Contact Now


How to educe the glass and what to pay attention to

  • Author:Fanyu
  • Source:Www.glass.com.cn
  • Release on:2018-07-31
1. Precautions when using glass straight line edging machine:

Straight line edging machine (straight edge machine, round edge machine, beveling machine) works by clamping the glass with front and rear pressure plates and driving its linear motion for grinding. There are two points to be aware of during use:

1The front and rear pressure plate and the guide rail joint surface should be lubricated frequently. Otherwise, the normal service life of the machine will be affected by the premature wear of the front and rear pressure plate and the guide rail working surface. Some models have automatic lubrication devices, but also check the lubrication pipeline frequently. Is it smooth?

2 clampingglassThe clamping force should be appropriate, too loose to affect the grinding quality, too tight will increase the load of the machine, easy to produce jitter and creep phenomenon, it is easy to crush the glass when grinding thin glass, the clamping force can be a piece of slightly larger glass Clamped on the machine for testing, that is, the glass is clamped in the middle of the machine. When the machine is stopped, the two hands force the glass to move the glass, and it is suitable to adjust the clamping force to just move the hands.

2. Precautions when using glass shaped edging machine:

1 Whether the height of the suction cup of the special-shaped machine table has a great influence on the grinding effect. When assembling, the manufacturer has self-grinded the five sets of suction cup holders, and selected the suction cup glue with the same thickness to keep the height of each suction cup consistent, so generally Do not disassemble the suction cup under the circumstances. If the suction pad rubber is damaged, you should choose the same thickness to replace it.

2 After using the vacuum pump of the special-shaped machine for a period of time, the degree of vacuum will drop due to water inflow (ie, the suction is reduced). Therefore, it is necessary to check and eliminate the fault. Otherwise, the machine will work under the condition of insufficient suction, which will affect the grinding. Cutting quality, on the other hand, is prone to safety incidents.

3. Precautions when using bilateral edging machine:

1 Bilateral edging machine is a higher grade edging machine. It is recommended to fix two to three operations to ensure correct operation.

2 When there is an error or malfunction in the procedure of the bilateral grinding, it is recommended that the original manufacturer send personnel to repair and debug. Under normal circumstances, do not dismantle it, so as to avoid disruption of the program.

4. Precautions when using the moulding machine:

1 The model of the touch machine has a great influence on the grinding precision. The working surface of the template must be accurate in shape and height, and the finish should be high. If the profile is dependent on the template, the transition must be smooth.

2 When replacing the template and the suction cup, be sure to keep the level of the suction cup working surface, otherwise the grinding quality will be affected.

In addition to the edging machine described above, there are some edging machines with simple structure and single use, such as chamfering machine, small wafer machine, polishing machine, etc. In addition, there are special edging machines that specialize in processing certain products, such as car rearview mirror edging machines and hand basin edging machines.