Maintenance and repair of glass
In everyday use, the glass, and absolutely avoid sharp impacts and vibrations to prevent glass breakage. When surface fouling, water cleaning and wipe immediately with a dry cloth, such as when there is oil, oil pollution cleaning agents wash, wipe with clean water. Attention when cleaning do not use corrosive cleaning agents landed on the border, do not use the material too hard cleaning tools to prevent surface corrosion, damage border.
GlassWhen corruption occurs, it should be replaced in a timely manner. Replace method is relatively simple, get rid of glass sealing materials on the border, according to the original size coupled with the new glass. Glass brick wall rupture occurs, should be using the plastic glass repair. Small series from the following 3 aspects below for everyone to talk about glass cleaning problems.
Glass cleaner
1. Smart glass tips
Wipe the glass with a damp cloth and then with a clean wet cloth with a bit of white wine, and little stress strength on the glass to clean it again. Rub after the glass is clean and bright.
2. how to clean the glass
Using alkaline scouring powder to clean and then coated with sodium hydroxide or dilute ammonia solution on the glass and in half an hour and then wipe with a cloth.
3. mirror-maintenance tips
Mirror glass is used, generally have been cut, and after a local glass cutter cutting stroke, moisture easily entered from the side mirror. A long period of time, corrosion will mirror, mildew, rust. So you may wish to buy back at the mirror, on one side coated with a layer of paint, if quilt cover with a layer of the better. Usual, often with a dry, soft cloth to wipe the mirror's surface, keep the mirror often dry and clean.