The curvature of the curved glass produced by the tempering furnace is unstable - how to solve it
Fanyu
Www.glass.com.cn
2018-10-31 14:24:38
Bending of tempering furnaceglassReasons for unstable arc: 1. The curvature of the glass is not adjusted well; 2. The temperature of the glass is too low when the furnace is discharged; 3. The furnace temperature is out of control; 4. The curved section of the bender is leaking.
Corresponding treatment methods: 1. Re-arcing the arc with the template; 2. Prolonging the heating time or increasing the furnace temperature; 3. Checking whether the furnace wire and the thermocouple work normally; 4. Check whether the shutter is leaking with a lighter.
Corresponding treatment methods: 1. Re-arcing the arc with the template; 2. Prolonging the heating time or increasing the furnace temperature; 3. Checking whether the furnace wire and the thermocouple work normally; 4. Check whether the shutter is leaking with a lighter.