Glass Engineering Technology Quality Requirements
Fanyu
Www.glass.com.cn
2018-05-02 16:06:00
| 1. The variety and color of glass should meet the design requirements (samples should be confirmed by Party A or design), the quality should meet the national product inspection standards and provide certificate, safety glass must have mandatory certification mark and provide a copy of the certificate (copy should be Cap the supplier red chapter). The 2, all kinds of glass thickness must be uniform, smooth and flat, there must be no bubbles, water lines, cracks, scratches, collapse, missing corners. 3, car mirror must be edging. The 4, paint the same plane (in addition to design requirements) must be the same color (the same sample), no color difference. All glasses (except for the specified ones) are fully edging and must be smooth and smooth after edging is completed. The 5,Laminated glassThe exposed side must be smooth and flat, with no height difference. The 6. The length of left seam or tight seam glass is 1mm. The size of the seam must be the same and the error is zero. The 7. When installing the glass in the glass embedded in the wall, the part in the wall or steel frame must be coated with sandpaper. The 8, white mirror, paint glass installation, the back must be full of white stickers.  |