Home > News > Technical documentation > Precautions for the use of gla.....
Certifications
Best selling products
Contact us
Company Name: Qingdao yujing fanyu Trading Co. Ltd. Address:Room 1701, Building 2, Yulong Building, #, Miaoling Road, Qingdao City, China Tel: 86-0532...
Contact Now
Share

News

Precautions for the use of glass cleaning machines

  • Author:Fanyumaoyi
  • Source:Chinamirrormanufacturer. com
  • Release on :2017-07-12
  The physical principle of glass washing machine is that the transducer converts high-frequency electric energy into mechanical energy, which produces a very high frequency vibration and propagates to the solution in the cleaning tank. Under the action of the transducer, the interior of the cleaning fluid will continuously produce a large number of tiny bubbles and burst, and each bubble rupture will produce hundreds of degrees of high temperature and nearly thousands of atmospheric shock waves, so as to wash the workpiece clean. The advent of glass cleaning machine in the mirror, vacuum coating, tempering, thermal bending, insulating glass and other deep-processing process before the glass surface cleaning, drying treatment of special equipment to provide a convenient.
  
   The use of glass cleaning machine should be noted:
  
  (1) Glass cleaning machine because it is button control, so pay attention to open the blower first, after the heater. Turn off the heater and turn off the blower. We must not forget this order.
  
  (2) The glass cleaning machine must put the speed adjuster back to zero when stopping the motor, or there will be unnecessary trouble.
  
  (3) Glass Cleaning machine glass discharge is a regular, must be placed in the specified limit.
  
  (4) Glass cleaning machine motor has a pressing stop button, can be used in emergency situations, usually do not touch.
  
  (5)GlassCleaning machine when the thickness of the glass is changed, it is necessary to adjust the height of the wind knife in time, or cause unnecessary damage to the accident.
  
  (6) Glass cleaning machine water level control between 200-250mm, not high, low water.
glass cleaning glass