google-site-verification=lcRET2DFJ5VFLkTpDhkBOPxGtmMJJjroWl98IPoKNb8
Home > News
News
Customer case
Technical documentation
Industry News
Company News

News

Release on2019-05-10
Usually only two conditions affect the life of the door and window glass, humid air and high temperature. Persistent moist air can cause mildew in the......Read More>>
Release on2019-05-08
Glass fine grinding: Fine grinding edge is also called fine grinding edge. It is usually done by large and medium-sized glass edger. It is gradually r......Read More>>
Release on2019-04-30
Kerosene increases the surface tension of the glass, does not blast, and the cut surface is smooth. If you use a glass knife, it is not rubbed.glassOn......Read More>>
Release on2019-04-29
A: The melting temperature of general silicon-containing metal oxide glass (bottle glass, flat glass, instrument glass, etc.) is above 1400 degrees Ce......Read More>>
Release on2019-04-28
Reason 1: There is a quality problem with the original glass, and a glass that is not well-annealed or a glass that has a large amount of air bubbles ......Read More>>
Release on2019-04-25
The liquid crystal glass substrate has strict quality control requirements and high equipment precision requirements. The traditional contact type thi......Read More>>
Release on2019-04-24
Solar photovoltaic glass is a special glass that is laminated to a solar cell and can generate electricity using solar radiation and has associated cu......Read More>>
Release on2019-04-19
On April 12, 2019, the utilization rate of glass capacity was 69.87%; the chain rose by 0.15% last week, up by -0.67% compared with last year; the uti......Read More>>
Release on2019-04-17
The bathroom is a place that we often use in our daily life. It is also an indispensable place in the home, so it is not sloppy in the bathroom decora......Read More>>
Release on2019-04-04
In the past, the problems of condensation on doors, windows and curtain walls in cold areas have been slowly attacked by the extreme weather and the p......Read More>>
Release on2019-04-02
On the whole, the overall operation of the soda ash market in the late stage is relatively strong. The main rising resistance is: 1. There are fewer m......Read More>>
Release on2019-04-01
The main components of the insulating glass composite strip are polyisobutylene and butyl rubber. Because the internal structure already contains desi......Read More>>
Release on2019-04-01
At the weekend, the domestic glass spot market showed a steady performance, and the manufacturers still focused on increasing the funds for returning ......Read More>>
Release on2019-03-25
Step 1: Elastic line. According to the floor design elevation line, the height of the wall is high to the ceiling design elevation, the vertical eleva......Read More>>
Release on2019-03-21
After the glass is machined by the edger, if the collapse of the edge occurs, it will not only affect the aesthetics of the glass, but also affect the......Read More>>
Release on2019-03-21
Many homes use frosted glass. Does frosted glass affect lighting? I will answer you one by one today. Frosted glass can affect daylighting......Read More>>
Release on2019-03-19
After the original glass is treated in the glass tempering furnace, pitting will occur. The pitting phenomenon is also a kind of defect in the appeara......Read More>>
Release on2019-03-14
(1) No. 1 material high temperature resistant glass (350 degree high temperature glass) Annealing temperature: 560-650 ° C ......Read More>>
Release on2019-03-13
1, sand valve broken sand Reason: It may be that the sand screen is not clean and there is debris mixed into the sand. Such as pebbles, pa......Read More>>
Release on2019-02-19
[Furning glass of the vessel] Glassware products have traditionally been blown by hand-melting, especially for export products, and are st......Read More>>