The use of glass in decoration is very common, from the exterior wall windows to indoor screens, doors and so on will be used to, in this article will tell you the classification of glass, hoping that consumers have superficial understanding, can be fitted with the room suitable for glass.
The simple classification of glass is mainly divided into flat glass and special glass. Flat Glass is divided into three types: The method of the primer on the Flat glass (divided into slot/non-slot two), Flat glass plate andFloat Glass。 Float glass is becoming the mainstream of glass manufacturing because of its uniform thickness, parallel to the upper and lower surface, coupled with the influence of high labor productivity and good management. and special glass varieties are numerous, according to the decoration of the following common varieties one by one description:
1, ordinary flat glass。 Its thickness is generally from 3mm to 15mm, from the frame of the surface to a large area cut off, the thickness of different use of different functions, 15mm more than the need to be customized.
2. Other glass.Other glass said, just relative to the flat glass, is not the industry officially classified. Mainly include:
1, tempered glass. It is the ordinary flat glass after processing and become a prestressed glass. Tempered glass, compared to ordinary flat glass, has two major characteristics:
1 The former strength is the latter several times, the tensile degree is the latter 3 times times more than the impact resistance is the latter 5 times times more.
2 The tempered glass is not easy to break, even if the fragmentation can be broken in the form of a sharp particles, damage to human body greatly reduced.
2, frosted glass. It is also in the ordinary flat glass above grinding sand processing. The general thickness of more than 9 mm below, with 5, 6 mm thick majority.
3, Sandblasting glass. The performance is basically similar to frosted glass, the difference is to change grinding sand for sandblasting. As a result of the two visually similar, many owners, even decoration professionals confuse them.
4, embossing Glass. A flat glass made by a calendering method. Its biggest feature is the translucent opaque, more to be used in the toilet and other decoration areas.
5, Rings. Is the use of calendering method, wire or metal mesh in the glass is made of a kind of impact-resistant flat glass, affected by the impact of only the formation of a radiant crack and not falling injured people. Therefore, the use of high-rise buildings and strong vibration of the plant.
6, hollow glass. The use of glue will be two pieces of glass to maintain a certain interval, the interval is dry air, the surrounding again sealed with the material, mainly used in the decoration of noise requirements.
7, laminated glass.Laminated GlassIt is generally composed of two pieces of ordinary flat glass (also can be tempered glass or other special glass) and glass between the organic bonding layer. When damaged, the debris is still sticking to the glue layer, avoiding the damage of debris splash to the human body. More used for decoration projects with safety requirements.
8, hot bending glass. The surface glass is formed by heating and softening of the flat glass in the mould and then annealed. In some advanced decoration the frequency of appearing more and more high, need to book, no spot.
9, glass brick. Glass brick production process basically and flat glass, different is the molding method. Among them is dry air. More used for decorative items or have heat preservation requirements of the translucent modelling.
|
|